PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19-12-F147-2509
19-12-F147-2509 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, aperture_width: 6.040 INCHES NOMINAL IN, aperture_length: 14.060 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, inside_corner_radius: 0.170 INCHES NOMINAL IN, cross-sectional_thickness: 0.090 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-285-4024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19-12-F147-2509
NSN: 5330-01-285-4024
FSC: 5330
CAGE: 18565 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CHOMERICS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
aperture_width6.040 INCHES NOMINAL IN
aperture_length14.060 INCHES NOMINAL IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
inside_corner_radius0.170 INCHES NOMINAL IN
cross-sectional_thickness0.090 INCHES NOMINAL IN
material_document_and_classificationZZ-R-765 CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-285-4024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19-12-F147-2509 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE LENGTH: 14.060 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.090 INCHES NOMINAL IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
INSIDE CORNER RADIUS: 0.170 INCHES NOMINAL IN
•
APERTURE WIDTH: 6.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH14.060 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SILICONE CLASS Q OVERALL
CROSS-SECTIONAL THICKNESS0.090 INCHES NOMINAL IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
INSIDE CORNER RADIUS0.170 INCHES NOMINAL IN
APERTURE WIDTH6.040 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
5055003Interchangeable
interchangeable cross-reference
interchangeable
505003Interchangeable
interchangeable cross-reference
interchangeable
5055001Interchangeable
interchangeable cross-reference
interchangeable
0N279329-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19-12-F147-2509?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19-12-F147-2509?
19-12-F147-2509 is a GASKET.
What parts can replace 19-12-F147-2509?
There are 4 known substitutes for 19-12-F147-2509: 5055003, 505003, 5055001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19-12-F147-2509?
19-12-F147-2509 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-285-4024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19-12-F147-2509

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026