PartsTable
Technical Data Sheet
Download PDF

18XED744765A — PLATE,MENDING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18XED744765A: PLATE,MENDING.

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 0.400 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, special_features: 0.142 IN. MIN.

AND 0.149 IN. MAX. DIA.

FOR OTHER TWO MOUNTING HOLES IN, style_designator: RECTANGULAR, material_thickness: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-251-5047, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18XED744765A
NSN: 5340-01-251-5047
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
hole_quantity4
overall_width0.400 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
special_features0.142 IN. MIN. AND 0.149 IN. MAX. DIA. FOR OTHER TWO MOUNTING HOLES IN
style_designatorRECTANGULAR
material_thickness0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
mounting_hole_typePLAIN
mounting_hole_diameter0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
material_document_and_classificationAMS4026 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-251-5047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18XED744765A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4026 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4026 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.142 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH0.400 INCHES NOMINAL IN
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
SPECIAL FEATURES0.142 IN. MIN. AND 0.149 IN. MAX. DIA. FOR OTHER TWO MOUNTING HOLES IN
MATERIALALUMINUM ALLOY 6061
HOLE QUANTITY4
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
ED744765Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 18XED744765A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18XED744765A?
18XED744765A is a PLATE,MENDING.
What parts can replace 18XED744765A?
There is 1 known substitute for 18XED744765A: ED744765. Substitute compatibility should be verified for your specific system.
What is the NSN for 18XED744765A?
18XED744765A is cataloged in the U.S. Government catalog under NSN 5340-01-251-5047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18XED744765A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.