PartsTable
Technical Data Sheet

18S-FS2/.25IN ITEM 6 — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18S-FS2/.25IN ITEM 6: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include material: GRAPHITE AND STEEL COMP 316 OVERALL, end_item_identification: 1/4 IN. CLASS 800 GATE VALVE1/4 IN.

CLASS 800 GATE VALVE IN, part_name_assigned_by_controlling_agency: BONNET GASKET,SPIRAL WOUNDBONNET GASKET,SPIRAL WOUND. This part is cataloged in the U.S. Government catalog under NSN 5330-01-584-1618, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18S-FS2/.25IN ITEM 6
NSN: 5330-01-584-1618
FSC: 5330 — Packing and Gasket Materials
CAGE: 61661 — NEWMANS INC NEW JERSEY DIV (USA)
SPECIFICATIONS
materialGRAPHITE AND STEEL COMP 316 OVERALL
end_item_identification1/4 IN. CLASS 800 GATE VALVE1/4 IN. CLASS 800 GATE VALVE IN
part_name_assigned_by_controlling_agencyBONNET GASKET,SPIRAL WOUNDBONNET GASKET,SPIRAL WOUND
NSN5330-01-584-1618
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18S-FS2/.25IN ITEM 6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: GRAPHITE AND STEEL COMP 316 OVERALL
TECHNICAL CHARACTERISTICS
PART NAME ASSIGNED BY CONTROLLING AGENCYBONNET GASKET,SPIRAL WOUNDBONNET GASKET,SPIRAL WOUND
END ITEM IDENTIFICATION1/4 IN. CLASS 800 GATE VALVE1/4 IN. CLASS 800 GATE VALVE IN
MATERIALGRAPHITE AND STEEL COMP 316 OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 18S-FS2/.25IN ITEM 6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18S-FS2/.25IN ITEM 6?
18S-FS2/.25IN ITEM 6 is a GASKET,SPIRAL WOUND.
What is the NSN for 18S-FS2/.25IN ITEM 6?
18S-FS2/.25IN ITEM 6 is cataloged in the U.S. Government catalog under NSN 5330-01-584-1618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18S-FS2/.25IN ITEM 6