PartsTable / COMPONENT / 18F682D25
18F682D25
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, housing_bore_diameter: 1.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-266-4758, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
18F682D25
NSN: 5330-00-266-4758 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL CORROSION RESISTING CASE case_style SQUARE seal_width 0.375 INCHES NOMINAL IN housing_bore_diameter 1.500 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.000 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-266-4758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 18F682D25
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: STEEL CORROSION RESISTING CASE
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
• SEAL WIDTH: 0.375 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 1.500 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE MATERIAL STEEL CORROSION RESISTING CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT MATERIAL RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 1.000 INCHES NOMINAL IN SEAL WIDTH 0.375 INCHES NOMINAL IN HOUSING BORE DIAMETER 1.500 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
18F682D25 Interchangeable interchangeable cross-reference
interchangeable
9865 Interchangeable interchangeable cross-reference
interchangeable
X73-24 Interchangeable interchangeable cross-reference
interchangeable
33S44375-2275 Interchangeable Same NIIN cross-reference
interchangeable
21159-0288 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 18F682D25?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18F682D25?
18F682D25 is a SEAL,PLAIN ENCASED.
What parts can replace 18F682D25?
There are 6 known substitutes for 18F682D25: 18F682D25, 9865, X73-24 and 3 more. Substitute compatibility should be verified for your specific system.
Is 18F682D25 still available?
18F682D25 is currently cancelled.
Request a Quote — 18F682D25