PartsTable
Technical Data Sheet
Download PDF

18A2610 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18A2610: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 2.250 INCHES NOMINAL IN, diameter: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN, corner_radius: 0.016 INCHES NOMINAL IN, flange_thickness: 0.500 INCHES NOMINAL IN, special_features: HOLE DRILLED THRU ENTIRE LENGTH OF FLANGE, style_designator: FLANGED LEFT INTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-216-4188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18A2610
NSN: 5340-01-216-4188
FSC: 5340 — Hardware, Commercial
CAGE: 2Y614 — LINK-BELT CRANES, L.P., LLLP (USA)
SPECIFICATIONS
length2.250 INCHES NOMINAL IN
diameter0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
corner_radius0.016 INCHES NOMINAL IN
flange_thickness0.500 INCHES NOMINAL IN
special_featuresHOLE DRILLED THRU ENTIRE LENGTH OF FLANGE
style_designatorFLANGED LEFT INTERNAL THREAD
cross-sectional_shapeHEXAGON
flange_width_across_flats1.250 INCHES NOMINAL IN
NSN5340-01-216-4188
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18A2610 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 1.250 INCHES NOMINAL IN
•
CORNER RADIUS: 0.016 INCHES NOMINAL IN
•
LENGTH: 2.250 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED LEFT INTERNAL THREAD
•
DIAMETER: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS1.250 INCHES NOMINAL IN
CORNER RADIUS0.016 INCHES NOMINAL IN
LENGTH2.250 INCHES NOMINAL IN
FLANGE THICKNESS0.500 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED LEFT INTERNAL THREAD
DIAMETER0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEHEXAGON
SPECIAL FEATURESHOLE DRILLED THRU ENTIRE LENGTH OF FLANGE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 18A2610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18A2610?
18A2610 is a STANDOFF,THREADED,SPACING.
What is the NSN for 18A2610?
18A2610 is cataloged in the U.S. Government catalog under NSN 5340-01-216-4188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18A2610