PartsTable
Technical Data Sheet
Download PDF

1898S71 — RETAINER,ROLLER,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1898S71: RETAINER,ROLLER,BEARING.

The RETAINER,ROLLER,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8615 OVERALL, bore_diameter: 5.4650 INCHES MINIMUM AND 5.4660 INCHES MAXIMUM IN, overall_width: 2.8760 INCHES MINIMUM AND 2.8800 INCHES MAXIMUM IN, outside_diameter: 6.0450 INCHES MINIMUM AND 6.0500 INCHES MAXIMUM IN, special_features: CROWNED OD, style_designator: ROLLER RETAINER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-377-6189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1898S71
NSN: 3110-00-377-6189
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78500 — MERITOR HEAVY VEHICLE SYSTEMS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 8615 OVERALL
bore_diameter5.4650 INCHES MINIMUM AND 5.4660 INCHES MAXIMUM IN
overall_width2.8760 INCHES MINIMUM AND 2.8800 INCHES MAXIMUM IN
outside_diameter6.0450 INCHES MINIMUM AND 6.0500 INCHES MAXIMUM IN
special_featuresCROWNED OD
style_designatorROLLER RETAINER
retainer_piece_quantity1
retainer_fabrication_methodMACHINED
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-377-6189
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1898S71 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
STYLE DESIGNATOR: ROLLER RETAINER
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 6.0450 INCHES MINIMUM AND 6.0500 INCHES MAXIMUM IN
•
BORE DIAMETER: 5.4650 INCHES MINIMUM AND 5.4660 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 8615 OVERALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
STYLE DESIGNATORROLLER RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.8760 INCHES MINIMUM AND 2.8800 INCHES MAXIMUM IN
OUTSIDE DIAMETER6.0450 INCHES MINIMUM AND 6.0500 INCHES MAXIMUM IN
SPECIAL FEATURESCROWNED OD
BORE DIAMETER5.4650 INCHES MINIMUM AND 5.4660 INCHES MAXIMUM IN
MATERIALSTEEL COMP 8615 OVERALL
RETAINER PIECE QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 1
109441Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 1898S71?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1898S71?
1898S71 is a RETAINER,ROLLER,BEARING.
What parts can replace 1898S71?
There is 1 known substitute for 1898S71: 109441. Substitute compatibility should be verified for your specific system.
What is the NSN for 1898S71?
1898S71 is cataloged in the U.S. Government catalog under NSN 3110-00-377-6189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1898S71