PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 189585
189585 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CONTROL ASSEMBLY,STEERING is a the manufacturer industrial component. Key specifications include end_item_identification: AIRBORNE SURVEILLANCE DETECTION EQUIPMENT - 3. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-018-9585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
189585
NSN: 5305-00-018-9585
FSC: 5305
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
end_item_identificationAIRBORNE SURVEILLANCE DETECTION EQUIPMENT - 3
NSN5305-00-018-9585
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 189585 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
THREAD LENGTH: 0.538 INCHES MINIMUM IN
•
SCREW SURFACE TREATMENT: PHOSPHATE
•
THREAD QUANTITY PER INCH: 24
•
HEAD STYLE: FLAT COUNTERSUNK
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.312 INCHES IN
THREAD LENGTH0.538 INCHES MINIMUM IN
SCREW SURFACE TREATMENTPHOSPHATE
THREAD QUANTITY PER INCH24
HEAD STYLEFLAT COUNTERSUNK
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
211-1038-002Interchangeable
interchangeable cross-reference
interchangeable
6419Interchangeable
interchangeable cross-reference
interchangeable
24013-14Interchangeable
interchangeable cross-reference
interchangeable
189585Interchangeable
interchangeable cross-reference
interchangeable
MS35244-106Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 189585?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 189585?
189585 is a CONTROL ASSEMBLY,STEERING.
What parts can replace 189585?
There are 5 known substitutes for 189585: 211-1038-002, 6419, 24013-14 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 189585?
189585 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-018-9585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 189585

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026