PartsTable
Technical Data Sheet
Download PDF

1885336PC42 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1885336PC42: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, inner_groove_depth: 0.156 INCHES NOMINAL IN, inner_groove_width: 0.438 INCHES NOMINAL IN, peripheral_diameter: 8.250 INCHES NOMINAL IN, center_hole_diameter: 7.938 INCHES NOMINAL IN, cross-sectional_height: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-599-2028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1885336PC42
NSN: 5330-00-599-2028
FSC: 5330 — Packing and Gasket Materials
CAGE: 03956 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
inner_groove_depth0.156 INCHES NOMINAL IN
inner_groove_width0.438 INCHES NOMINAL IN
peripheral_diameter8.250 INCHES NOMINAL IN
center_hole_diameter7.938 INCHES NOMINAL IN
cross-sectional_height0.625 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-599-2028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1885336PC42 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
INNER GROOVE DEPTH: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 8.250 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.438 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 7.938 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
INNER GROOVE DEPTH0.156 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER8.250 INCHES NOMINAL IN
INNER GROOVE WIDTH0.438 INCHES NOMINAL IN
CENTER HOLE DIAMETER7.938 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
651094Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1885336PC42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1885336PC42?
1885336PC42 is a PACKING,PREFORMED.
What parts can replace 1885336PC42?
There is 1 known substitute for 1885336PC42: 651094. Substitute compatibility should be verified for your specific system.
What is the NSN for 1885336PC42?
1885336PC42 is cataloged in the U.S. Government catalog under NSN 5330-00-599-2028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1885336PC42