PartsTable / COMPONENT / 1879753
1879753
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES NOMINAL IN, material: STEEL BAND, slot_width: 0.275 INCHES NOMINAL IN, slot_length: 0.343 INCHES NOMINAL IN, overall_width: 1.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-363-7441, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1879753
NSN: 5340-00-363-7441 FSC: 5340 CAGE: 16764 — GENERAL MOTORS CORP DELCO REMY DIV (USA)
SPECIFICATIONS
diameter 0.265 INCHES NOMINAL IN material STEEL BAND slot_width 0.275 INCHES NOMINAL IN slot_length 0.343 INCHES NOMINAL IN overall_width 1.375 INCHES NOMINAL IN style_designator SINGLE LOOP surface_treatment ZINC BAND material_thickness 0.625 INCHES NOMINAL IN loop_inside_diameter 2.062 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 1.625 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 1.375 INCHES NOMINAL IN NSN 5340-00-363-7441
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1879753
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT: ZINC BAND
• STYLE DESIGNATOR: SINGLE LOOP
• LOOP INSIDE DIAMETER: 2.062 INCHES NOMINAL IN
• DIAMETER: 0.265 INCHES NOMINAL IN
• SLOT WIDTH: 0.275 INCHES NOMINAL IN
• SLOT LENGTH: 0.343 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL STEEL BAND SURFACE TREATMENT ZINC BAND STYLE DESIGNATOR SINGLE LOOP LOOP INSIDE DIAMETER 2.062 INCHES NOMINAL IN DIAMETER 0.265 INCHES NOMINAL IN SLOT WIDTH 0.275 INCHES NOMINAL IN SLOT LENGTH 0.343 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 1.375 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 1.625 INCHES NOMINAL IN OVERALL WIDTH 1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
69235 Interchangeable interchangeable cross-reference
interchangeable
S8510B Interchangeable interchangeable cross-reference
interchangeable
81020 Interchangeable interchangeable cross-reference
interchangeable
664-163 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1879753?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1879753?
1879753 is a CLAMP,LOOP.
What parts can replace 1879753?
There are 4 known substitutes for 1879753: 69235, S8510B, 81020 and 1 more. Substitute compatibility should be verified for your specific system.
Is 1879753 still available?
1879753 is currently cancelled.
Request a Quote — 1879753