PartsTable
Technical Data Sheet
Download PDF

187697 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

187697: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include end_item_identification: LOGISTGICS SUPPORT VESSEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-366-2853, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
187697
NSN: 5305-00-366-2853
NIINs: 003662853, 012819061, 014464827
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identificationLOGISTGICS SUPPORT VESSEL
NSN5305-00-366-2853
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 187697 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.750 INCHES NOMINAL IN
•
THREAD LENGTH: 1.688 INCHES MINIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
HEAD HEIGHT0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH4.750 INCHES NOMINAL IN
THREAD LENGTH1.688 INCHES MINIMUM IN
HOLE CONFIGURATION STYLEROUND
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
8055508Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 187697?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 187697?
187697 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 187697?
There is 1 known substitute for 187697: 8055508. Substitute compatibility should be verified for your specific system.
What is the NSN for 187697?
187697 is cataloged in the U.S. Government catalog under NSN 5305-00-366-2853. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 187697

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.