PartsTable
Technical Data Sheet
PartsTable / MRO / 1871A
1871A ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CAPACITOR,FIXED,ELECTROLYTIC is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include height: 1.188 INCHES NOMINAL IN, diameter: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION), point_type: EXTENDED PRONG SQUARE CUT, shank_length: 0.375 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-033-6022, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1871A
NSN: 5315-00-033-6022
FSC: 5315
CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
height1.188 INCHES NOMINAL IN
diameter0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_stylePAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
point_typeEXTENDED PRONG SQUARE CUT
shank_length0.375 INCHES NOMINAL IN
undercut_width0.052 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN
effective_length0.823 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
special_featuresSURFACE LOCATED DISK TYPE CHECK VALVE
style_designatorTHREADED
underloop_length1.125 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
features_providedCASEHARDENED
NSN5315-00-033-6022
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1871A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
HEIGHT: 0.125 INCHES NOMINAL IN
•
FEATURES PROVIDED: CASEHARDENED
•
UNDER HEAD LENGTH: 1.031 INCHES NOMINAL IN
•
DIAMETER: 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
•
HEAD STYLE: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
•
MATERIAL: STEEL OVERALL
•
EFFECTIVE LENGTH: 0.823 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
HEIGHT0.125 INCHES NOMINAL IN
FEATURES PROVIDEDCASEHARDENED
UNDER HEAD LENGTH1.031 INCHES NOMINAL IN
DIAMETER0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
HEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
MATERIALSTEEL OVERALL
EFFECTIVE LENGTH0.823 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
STYLE DESIGNATORGROOVE
UNDERCUT WIDTH0.052 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SP79020Interchangeable
interchangeable cross-reference
interchangeable
NASM24665Interchangeable
interchangeable cross-reference
interchangeable
MS24665-338Interchangeable
interchangeable cross-reference
interchangeable
H9362Interchangeable
interchangeable cross-reference
interchangeable
1829Interchangeable
interchangeable cross-reference
interchangeable
1871AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1871A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1871A?
1871A is a CAPACITOR,FIXED,ELECTROLYTIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1871A?
There are 8 known substitutes for 1871A: SP79020, NASM24665, MS24665-338 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1871A?
1871A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-033-6022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1871A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026