PartsTable
Technical Data Sheet
Download PDF

186819 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

186819: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8630, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN, first_leg_length: 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, second_leg_style: END RADIUS AND TAPERED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-396-4635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
186819
NSN: 5340-00-396-4635
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 8630
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
first_leg_length0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
second_leg_styleEND RADIUS AND TAPERED
second_leg_width2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
second_leg_thickness0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
NSN5340-00-396-4635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 186819 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.010 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: FOUR HOLES
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.010 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM IN
SECOND LEG LENGTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEFOUR HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 186819?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 186819?
186819 is a BRACKET,ANGLE.
What is the NSN for 186819?
186819 is cataloged in the U.S. Government catalog under NSN 5340-00-396-4635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 186819

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.