18605-4MLR2 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

18605-4MLR2: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND ALL ACTUATORS, shaft_length: 0.334 INCHES NOMINAL FIRST ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.375 INCHES MAXIMUM IN, pole_quantity: 1 SECOND SECTION FRONT, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-701-2897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 18605-4MLR2

NSN: 5930-00-701-2897
FSC: 5930 — Switches
CAGE: 82104 — STANDARD GRIBSBY INC (USA)

SPECIFICATIONS

shaft_type	ROUND ALL ACTUATORS
shaft_length	0.334 INCHES NOMINAL FIRST ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.375 INCHES MAXIMUM IN
pole_quantity	1 SECOND SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	1.565 INCHES MAXIMUM IN
overall_length	2.777 INCHES NOMINAL IN
shaft_diameter	0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM FIRST ACTUATOR IN
throw_quantity	5 SECOND SECTION REAR
mounting_method	THREADED BUSHING SINGLE MOUNTING FACILITY
NSN	5930-00-701-2897

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND ALL ACTUATORS

•

SHAFT DIAMETER: 0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM SECOND ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL AT 9:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

PRECIOUS MATERIAL: SILVER

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND ALL ACTUATORS
OVERALL HEIGHT	1.565 INCHES MAXIMUM IN
SHAFT DIAMETER	0.185 INCHES MINIMUM AND 0.187 INCHES MAXIMUM SECOND ACTUATOR IN
SHAFT DIAMETER	0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM FIRST ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL AT 9:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
PRECIOUS MATERIAL	SILVER
CONTACT LOAD CURRENT RATING	2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL

SUBSTITUTES & CROSS-REFERENCES 4

CRLPA040Reference document

Same NSN cross-reference

Reference document — Secondary reference

9384F2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10701-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

193984F2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 18605-4MLR2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 18605-4MLR2?

18605-4MLR2 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 18605-4MLR2?

There are 4 known substitutes for 18605-4MLR2: CRLPA040, 9384F2, 10701-1 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 18605-4MLR2?

18605-4MLR2 is cataloged in the U.S. Government catalog under NSN 5930-00-701-2897. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

18605-4MLR2 — SWITCH,ROTARY

Request a Quote — 18605-4MLR2