PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1855701
1855701 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

LEVER ASSEMBLY,POWER-SPEED CONTR. Key specifications include end_item_identification: GENERATOR SET, 7.5KW DIESEL ENGINE, part_name_assigned_by_controlling_agency: LEVER ASSEMBLY,POWER-SPEED CONTROL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-7089, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1855701
NSN: 5330-00-358-7089
FSC: 5330
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
end_item_identificationGENERATOR SET, 7.5KW DIESEL ENGINE
part_name_assigned_by_controlling_agencyLEVER ASSEMBLY,POWER-SPEED CONTROL
NSN5330-00-358-7089
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1855701 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 3
•
HOLE DIAMETER: 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER OVERALL
•
APERTURE DIAMETER: 0.969 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
SIDE RADIUS FROM BOLT CIRCLE: 1.454 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY3
HOLE DIAMETER0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER OVERALL
APERTURE DIAMETER0.969 INCHES NOMINAL IN
OVERALL WIDTH2.219 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
SIDE RADIUS FROM BOLT CIRCLE1.454 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER1.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
34482Interchangeable
interchangeable cross-reference
interchangeable
1663-1Interchangeable
interchangeable cross-reference
interchangeable
853569Interchangeable
interchangeable cross-reference
interchangeable
LS3234-3Interchangeable
interchangeable cross-reference
interchangeable
13274Interchangeable
interchangeable cross-reference
interchangeable
734FFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1855701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1855701?
1855701 is a LEVER ASSEMBLY,POWER-SPEED CONTR.
What parts can replace 1855701?
There are 22 known substitutes for 1855701: 34482, 1663-1, 853569 and 19 more. Substitute compatibility should be verified for your specific system.
Is 1855701 still available?
1855701 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1855701

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026