PartsTable
Technical Data Sheet
Download PDF

1853346 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1853346: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL BODY, body_length: 0.340 INCHES MAXIMUM IN, body_diameter: 0.250 INCHES MAXIMUM IN, terminal_type: WIRE LEAD, inclosure_type: ENCASED, overall_height: 1.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-364-1556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1853346
NSN: 5340-00-364-1556
NIINs: 003641556, 012305863
FSC: 5340 — Hardware, Commercial
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialRUBBER NATURAL BODY
body_length0.340 INCHES MAXIMUM IN
body_diameter0.250 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
inclosure_typeENCASED
overall_height1.125 INCHES NOMINAL IN
terminal_length1.000 INCHES MINIMUM IN
style_designatorAXIAL TERMINAL EACH END
base_inside_diameter1.422 INCHES NOMINAL IN
electrical_resistance39.200 KILOHMS
reliability_indicatorNOT ESTABLISHED
opening_inside_diameter0.656 INCHES NOMINAL IN
NSN5340-00-364-1556
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1853346 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.656 INCHES NOMINAL IN
•
STYLE DESIGNATOR: THRU-HOLE
•
BASE INSIDE DIAMETER: 1.422 INCHES NOMINAL IN
•
MATERIAL: RUBBER NATURAL BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.125 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.656 INCHES NOMINAL IN
STYLE DESIGNATORTHRU-HOLE
BASE INSIDE DIAMETER1.422 INCHES NOMINAL IN
MATERIALRUBBER NATURAL BODY
SUBSTITUTES & CROSS-REFERENCES 1
7037884Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1853346?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1853346?
1853346 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1853346?
There is 1 known substitute for 1853346: 7037884. Substitute compatibility should be verified for your specific system.
What is the NSN for 1853346?
1853346 is cataloged in the U.S. Government catalog under NSN 5340-00-364-1556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1853346

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.