PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 184112H1
184112H1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.4219 INCHES NOMINAL IN, bore_diameter: 3.8750 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1406 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3619, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
184112H1
NSN: 3110-00-100-3619
FSC: 3110
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.4219 INCHES NOMINAL IN
bore_diameter3.8750 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3619
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 184112H1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 3.8750 INCHES NOMINAL IN
•
CONE WIDTH: 1.4219 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.8750 INCHES NOMINAL IN
CONE WIDTH1.4219 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
438-432Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187AInterchangeable
interchangeable cross-reference
interchangeable
43-8Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B2-00Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B1-50Interchangeable
interchangeable cross-reference
interchangeable
370Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 184112H1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 184112H1?
184112H1 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 184112H1?
There are 20 known substitutes for 184112H1: 438-432, FF-B-187A, 43-8 and 17 more. Substitute compatibility should be verified for your specific system.
Is 184112H1 still available?
184112H1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 184112H1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026