PartsTable
Technical Data Sheet
Download PDF

18394PC2A2355 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18394PC2A2355: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, hardness_rating: 80.0 SHORE DUROMETER A MINIMUM AND 100.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 4.188 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-363-6544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18394PC2A2355
NSN: 5330-00-363-6544
FSC: 5330 — Packing and Gasket Materials
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating80.0 SHORE DUROMETER A MINIMUM AND 100.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter4.188 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-363-6544
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18394PC2A2355 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A MINIMUM AND 100.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 4.188 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING80.0 SHORE DUROMETER A MINIMUM AND 100.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER4.188 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
38587Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 18394PC2A2355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18394PC2A2355?
18394PC2A2355 is a GASKET.
What parts can replace 18394PC2A2355?
There is 1 known substitute for 18394PC2A2355: 38587. Substitute compatibility should be verified for your specific system.
What is the NSN for 18394PC2A2355?
18394PC2A2355 is cataloged in the U.S. Government catalog under NSN 5330-00-363-6544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18394PC2A2355