PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 182MAN4
182MAN4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 1.975 INCHES NOMINAL IN, outside_diameter: 2.500 INCHES NOMINAL IN, material_thickness: 0.470 INCHES NOMINAL IN, outer_edge_thickness: 0.240 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-755-6582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
182MAN4
NSN: 5330-00-755-6582
FSC: 5330
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter1.975 INCHES NOMINAL IN
outside_diameter2.500 INCHES NOMINAL IN
material_thickness0.470 INCHES NOMINAL IN
outer_edge_thickness0.240 INCHES NOMINAL IN
cross-sectional_shape_styleGROOVED FACE, DOUBLE SCRAPER
NSN5330-00-755-6582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 182MAN4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: GROOVED FACE, DOUBLE SCRAPER
•
INSIDE DIAMETER: 1.975 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.470 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.240 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEGROOVED FACE, DOUBLE SCRAPER
INSIDE DIAMETER1.975 INCHES NOMINAL IN
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.470 INCHES NOMINAL IN
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.240 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
G-194Interchangeable
interchangeable cross-reference
interchangeable
10-2513-7PIECE10Interchangeable
interchangeable cross-reference
interchangeable
VG95236-T122Interchangeable
interchangeable cross-reference
interchangeable
M22520/6-014Interchangeable
interchangeable cross-reference
interchangeable
7580-2RInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 182MAN4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 182MAN4?
182MAN4 is a RING,WIPER.
What parts can replace 182MAN4?
There are 5 known substitutes for 182MAN4: G-194, 10-2513-7PIECE10, VG95236-T122 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 182MAN4?
182MAN4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-755-6582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 182MAN4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026