PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1829L194
1829L194 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,BRAKE ANCHOR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, prong_length: 0.750 INCHES NOMINAL IN, opening_width: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN, wire_stock_diameter: 0.054 INCHES NOMINAL IN, material_document_and_classification: QQ-W-474 COMP A FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-474 COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-516-0353, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1829L194
NSN: 5315-00-516-0353
FSC: 5315
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
prong_length0.750 INCHES NOMINAL IN
opening_width0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
wire_stock_diameter0.054 INCHES NOMINAL IN
material_document_and_classificationQQ-W-474 COMP A FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-474 COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-516-0353
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1829L194 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRONG LENGTH: 0.750 INCHES NOMINAL IN
•
WIRE STOCK DIAMETER: 0.054 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PRONG LENGTH0.750 INCHES NOMINAL IN
WIRE STOCK DIAMETER0.054 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
160320R1Interchangeable
interchangeable cross-reference
interchangeable
1829L194Interchangeable
interchangeable cross-reference
interchangeable
823B1Interchangeable
interchangeable cross-reference
interchangeable
8344934Interchangeable
interchangeable cross-reference
interchangeable
30592-3Interchangeable
interchangeable cross-reference
interchangeable
ABA400AC2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1829L194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1829L194?
1829L194 is a WASHER,BRAKE ANCHOR.
What parts can replace 1829L194?
There are 15 known substitutes for 1829L194: 160320R1, 1829L194, 823B1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1829L194?
1829L194 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-516-0353. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1829L194

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026