182485 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

Hama · MRO · MRO_GENERAL

PRODUCT OVERVIEW

182485: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_length: 0.750 INCHES NOMINAL IN, body_diameter: 0.250 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-550-6753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 182485

NSN: 5331-00-550-6753
NIINs: 005506753, 008586879, 010173791
FSC: 5331 — O-ring
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_length	0.750 INCHES NOMINAL IN
body_diameter	0.250 INCHES NOMINAL IN
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
hardness_rating	65.0 SHORE DUROMETER A NOMINAL
terminal_length	1.500 INCHES NOMINAL IN
outside_diameter	0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN
section_quantity	1
style_designator	AXIAL TERMINAL EACH END
center_hole_diameter	0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
electrical_resistance	9.760 KILOHMS
NSN	5331-00-550-6753

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN

•

HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN
HARDNESS RATING	65.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 8

2-113 N506-65Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS9021-113ESReference document

Same NSN cross-reference

Reference document — Secondary reference

PRP568-113-4024-65Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

199056Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

124702-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS3578-113Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 182485?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 182485?

182485 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Hama. It is classified as a MRO (MRO_GENERAL).

What parts can replace 182485?

There are 8 known substitutes for 182485: 2-113 N506-65, MS9021-113ES, PRP568-113-4024-65 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 182485?

182485 is cataloged in the U.S. Government catalog under NSN 5331-00-550-6753. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

182485 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 182485