PartsTable
Technical Data Sheet
PartsTable / MRO / 18248
18248 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Compact design. 2.4 GHz wireless. Optical technology.

8 meter wireless range. Storable micro USB receiver. Plug & start.

Left & right hand use. . Key specifications include head_style: ROUND, head_height: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-958-5450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 18248
NSN: 5305-00-958-5450
FSC: 5305
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
head_styleROUND
head_height0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
fsc_application_dataMISCELLANEOUS ENGINE ACCESSORIES,AIRCRAFT
internal_drive_styleSLOT
end_item_identificationPACKBOT510 WITH EOD (EXPLOSIVE ORDANCE DEVICE)
NSN5305-00-958-5450
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 18248 · Trust ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.574 INCHES MINIMUM AND 0.667 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR ASTMA108 ASSN STD SINGLE MATERIAL RESPONSE
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD LENGTH0.574 INCHES MINIMUM AND 0.667 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
SCREW MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
173-64Interchangeable
interchangeable cross-reference
interchangeable
182-48Interchangeable
interchangeable cross-reference
interchangeable
18248-1Interchangeable
interchangeable cross-reference
interchangeable
9805-7204-1Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
Same NIIN cross-reference
interchangeable
MS35190-240Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 18248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18248?
18248 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 18248?
There are 9 known substitutes for 18248: 173-64, 182-48, 18248-1 and 6 more. Substitute compatibility should be verified for your specific system.
Is 18248 still available?
18248 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18248

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026