PartsTable
Technical Data Sheet
Download PDF

182172 — 182172

✓ Government record, cited
IMC Toys · ORING SEAL
PRODUCT OVERVIEW

182172: 182172.

The 182172 is a IMC Toys industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, housing_bore_diameter: 1.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-178-3782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
182172
NSN: 5330-00-178-3782
NIINs: 001783782, 011907912
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
housing_bore_diameter1.125 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.562 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-178-3782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 182172 MFR: IMC Toys ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.125 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.562 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.312 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.125 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.562 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 1
16700835Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
Manufacturer release date (catalog record)2016-01-01
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 182172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 182172?
182172 is a 182172 manufactured by IMC Toys.
What parts can replace 182172?
There is 1 known substitute for 182172: 16700835. Substitute compatibility should be verified for your specific system.
What is the NSN for 182172?
182172 is cataloged in the U.S. Government catalog under NSN 5330-00-178-3782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 182172

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.