PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 182-416
182-416 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Tablet case with a transparent back: So the design of your tablet can be seen<br>- The integrated magnet turns the device on when the lid is opened and off when it is closed<br>- Stand function for easy positioning of the device in two steps<br>- Openings for full access to connections and controls<br>- The device can remain in the bag while being used This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4755, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
182-416
NSN: 3110-00-156-4755
FSC: 3110
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.270 INCHES NOMINAL IN
overall_height0.560 INCHES NOMINAL IN
shank_diameter0.800 INCHES NOMINAL IN
outside_diameter3.375 INCHES NOMINAL IN
style_designatorSPECIAL SHAPED
bolt_hole_quantity12
bolt_circle_diameter2.810 INCHES NOMINAL IN
center_hole_diameter0.250 INCHES NOMINAL IN
NSN3110-00-156-4755
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 182-416 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 75.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 130.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER75.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL OUTSIDE DIAMETER130.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
50024Interchangeable
interchangeable cross-reference
interchangeable
A-A-59636-802JCBEInterchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
interchangeable cross-reference
interchangeable
11091Interchangeable
interchangeable cross-reference
interchangeable
5203HInterchangeable
interchangeable cross-reference
interchangeable
7410028Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 182-416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 182-416?
182-416 is a BEARING,BALL,ANNULAR manufactured by Hama.
What parts can replace 182-416?
There are 33 known substitutes for 182-416: 50024, A-A-59636-802JCBE, FFB171 and 30 more. Substitute compatibility should be verified for your specific system.
Is 182-416 still available?
182-416 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 182-416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026