PartsTable
Technical Data Sheet
PartsTable / MRO / 182-414
182-414 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Tablet case with a transparent back: So the design of your tablet can be seen<br>- The integrated magnet turns the device on when the lid is opened and off when it is closed<br>- Stand function for easy positioning of the device in two steps<br>- Openings for full access to connections and controls<br>- The device can remain in the bag while being used This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4746, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 182-414
NSN: 3110-00-156-4746
FSC: 3110
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter65.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width2.3125 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter140.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data143 TYPE AND 00 GRADE
NSN3110-00-156-4746
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 182-414 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
B17Interchangeable
Target,bull's-Eye
interchangeable
CWC87038X1ANG25Interchangeable
interchangeable cross-reference
interchangeable
WC87038X2100ANG25Interchangeable
interchangeable cross-reference
interchangeable
WC87038-1LTInterchangeable
interchangeable cross-reference
interchangeable
905313Interchangeable
interchangeable cross-reference
interchangeable
5313Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 182-414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 182-414?
182-414 is a NETWORK,PULSE FORMING manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 182-414?
There are 26 known substitutes for 182-414: B17, CWC87038X1ANG25, WC87038X2100ANG25 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 182-414?
182-414 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4746. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 182-414

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026