PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 18196
18196 ✓ Verified by PartsTable
Clementoni · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

Premium quality is achieved by using appropriate thick cardboard, a special non-reflective layer, and puzzle pieces’ perfect fitting. Key specifications include material: CORK AND RESIN NATURAL OVERALL, bore_type: STRAIGHT, nut_style: CAP, stem_type: RISING, nut_height: 0.469 INCHES NOMINAL IN, port_style: INVERTED FLARE SINGLE PORT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-057-5509, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18196
NSN: 5961-00-057-5509
FSC: 5961
CAGE: 01281 — TRW ELECTRONICS AND DEFENSE SECTOR RF DEVICES (USA)
SPECIFICATIONS
materialCORK AND RESIN NATURAL OVERALL
bore_typeSTRAIGHT
nut_styleCAP
stem_typeRISING
nut_height0.469 INCHES NOMINAL IN
port_styleINVERTED FLARE SINGLE PORT
valve_size10.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
thread_class3B
bore_diameter1.500 INCHES NOMINAL IN
overall_width2.250 INCHES NOMINAL IN
thread_seriesUNF
NSN5961-00-057-5509
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 18196 MFR Clementoni CYLINDER ASSEMBLY,HYDRAULIC BRAK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3675-X160Interchangeable
interchangeable cross-reference
interchangeable
115F 10INInterchangeable
interchangeable cross-reference
interchangeable
I15F-1-10INInterchangeable
interchangeable cross-reference
interchangeable
5454314Interchangeable
interchangeable cross-reference
interchangeable
FD18196Interchangeable
interchangeable cross-reference
interchangeable
18196Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 18196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18196?
18196 is a CYLINDER ASSEMBLY,HYDRAULIC BRAK manufactured by Clementoni.
What parts can replace 18196?
There are 7 known substitutes for 18196: 3675-X160, 115F 10IN, I15F-1-10IN and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 18196?
18196 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-057-5509. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18196

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026