PartsTable
Technical Data Sheet
Download PDF

1816781 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1816781: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.156 INCHES NOMINAL IN, material: COPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL, hole_diameter: 0.068 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), material_thickness: 0.016 INCHES NOMINAL IN, material_document_and_classification: QQ-C-530 FED SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-466-2461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1816781
NSN: 5340-00-466-2461
FSC: 5340 — Hardware, Commercial
CAGE: 03956 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width0.156 INCHES NOMINAL IN
materialCOPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL
hole_diameter0.068 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.016 INCHES NOMINAL IN
material_document_and_classificationQQ-C-530 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-466-2461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1816781 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-530 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
WIDTH: 0.156 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL
•
HOLE DIAMETER: 0.068 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
WIDTH0.156 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL
HOLE DIAMETER0.068 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1816781?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1816781?
1816781 is a CLIP,SPRING TENSION.
What is the NSN for 1816781?
1816781 is cataloged in the U.S. Government catalog under NSN 5340-00-466-2461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1816781