PartsTable
Technical Data Sheet
181538 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This table stand sets off your Echo Dot to a treat on your desk, sideboard or shelf. Besides an impressive display, you can place your Echo Dot in just the right position to receive voice commands.<br><br>- Thanks to the fixed angle setting, your Echo Dot is aligned in an upright position, perfect for receiving voice commands<br>- Openings for full access to connections and controls This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-2368, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
181538
NSN: 3110-00-100-2368
FSC: 3110
CAGE: S3662 — AB VOLVO PENTA (SWE)
SPECIFICATIONS
design_typeGENERATOR
mounting_typeBASE
arc_current_typeAC
remote_control_designNOT INCLUDED
auxiliary_power_output_designNOT INCLUDED
operator_type_for_which_designedSINGLE
maximum_current_at_specified_voltage60 AMP AT 24V V
minimum_current_at_specified_voltage50 AMP AT 24V V
NSN3110-00-100-2368
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 181538 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LOAD DIRECTION: RADIAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
MATERIAL: STEEL INNER RING
BEARING SEAL TYPE: CONTACT
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL RETAINER
BEARING SEAL TYPECONTACT
BORE DIAMETER30.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
211585Interchangeable
interchangeable cross-reference
interchangeable
350505Interchangeable
interchangeable cross-reference
interchangeable
72-6970-341Interchangeable
interchangeable cross-reference
interchangeable
20504-29Interchangeable
interchangeable cross-reference
interchangeable
895DUInterchangeable
interchangeable cross-reference
interchangeable
00314-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 181538?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 181538?
181538 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 181538?
There are 24 known substitutes for 181538: 211585, 350505, 72-6970-341 and 21 more. Substitute compatibility should be verified for your specific system.
Is 181538 still available?
181538 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 181538