PartsTable
Technical Data Sheet
18153-8 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This table stand sets off your Echo Dot to a treat on your desk, sideboard or shelf. Besides an impressive display, you can place your Echo Dot in just the right position to receive voice commands.<br><br>- Thanks to the fixed angle setting, your Echo Dot is aligned in an upright position, perfect for receiving voice commands<br>- Openings for full access to connections and controls This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-2368, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
18153-8
NSN: 3110-00-100-2368
FSC: 3110
CAGE: S3662 — AB VOLVO PENTA (SWE)
SPECIFICATIONS
design_typeGENERATOR
mounting_typeBASE
arc_current_typeAC
remote_control_designNOT INCLUDED
auxiliary_power_output_designNOT INCLUDED
operator_type_for_which_designedSINGLE
maximum_current_at_specified_voltage60 AMP AT 24V V
minimum_current_at_specified_voltage50 AMP AT 24V V
NSN3110-00-100-2368
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 18153-8 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LOAD DIRECTION: RADIAL
BORE SHAPE: STRAIGHT
INTERNAL FIT-UP DESIGNATION: STANDARD
MATERIAL: STEEL INNER RING
BEARING SEAL TYPE: CONTACT
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL RETAINER
BEARING SEAL TYPECONTACT
BORE DIAMETER30.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
211585Interchangeable
interchangeable cross-reference
interchangeable
350505Interchangeable
interchangeable cross-reference
interchangeable
72-6970-341Interchangeable
interchangeable cross-reference
interchangeable
20504-29Interchangeable
interchangeable cross-reference
interchangeable
895DUInterchangeable
interchangeable cross-reference
interchangeable
00314-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 18153-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18153-8?
18153-8 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 18153-8?
There are 24 known substitutes for 18153-8: 211585, 350505, 72-6970-341 and 21 more. Substitute compatibility should be verified for your specific system.
Is 18153-8 still available?
18153-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18153-8