PartsTable
Technical Data Sheet
Download PDF

18136-4 — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

18136-4: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, body_length: 0.342 INCHES MAXIMUM IN, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, body_diameter: 0.234 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-018-1364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 18136-4
NSN: 5305-00-018-1364
NIINs: 000181364, 006058680, 006838088, 012445839
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
body_length0.342 INCHES MAXIMUM IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
body_diameter0.234 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeWIRE LEAD
thread_length1.000 INCHES MAXIMUM IN
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
quality_factor25 MINIMUM SINGLE COMPONENT SINGLE WINDING
NSN5305-00-018-1364
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 18136-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 5
S188Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM90726Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35296-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFS85TYPE2STYLE10PGRADE5Reference document
Same NSN cross-reference
Reference document — Identification reference
Q1801Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 18136-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18136-4?
18136-4 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 18136-4?
There are 5 known substitutes for 18136-4: S188, NASM90726, MS35296-60 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 18136-4?
18136-4 is cataloged in the U.S. Government catalog under NSN 5305-00-018-1364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18136-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.