PartsTable
Technical Data Sheet
Download PDF

180965-1 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

180965-1: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: PARTIAL FIRST END, tooth_form: STANDARD, pitch_diameter: 0.5217 INCHES NOMINAL IN, pressure_angle: 25.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-311-7616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
180965-1
NSN: 3020-00-311-7616
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 71791 — CURTISS-WRIGHT CONTROLS, INC. DBA CURTISS WRIGHT DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_stylePLAIN, SOLID
bore_stylePARTIAL FIRST END
tooth_formSTANDARD
pitch_diameter0.5217 INCHES NOMINAL IN
pressure_angle25.0000 DEGREES
teeth_quantity12
hardness_rating54.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL
special_featuresINVOLUTE SPLINED BORE 21 TEETH,45 DEGREES PA,0.428 INCH,MINOR DIAMETER,0.479 IN. DIAMETER IN
style_designatorPROTRUDING HUBS
surface_treatmentCADMIUM OVERALL
bore_nominal_depth0.490 INCHES FIRST END IN
NSN3020-00-311-7616
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 180965-1 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.500 INCHES FIRST END IN
•
HUB NOMINAL DIAMETER: 0.2497 INCHES SECOND END IN
•
TEETH QUANTITY: 12
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PARTIAL FIRST END
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.740 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.500 INCHES FIRST END IN
HUB NOMINAL DIAMETER0.2497 INCHES SECOND END IN
TEETH QUANTITY12
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-8837,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
BODY STYLEPLAIN, SOLID
BORE STYLEPARTIAL FIRST END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.740 INCHES FIRST END IN
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.360 INCHES SECOND END IN
FIRST STEP NOMINAL LENGTH0.525 INCHES FIRST END IN
PRECISION CLASSIFICATIONQUALITY NUMBER 10
OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3020-00-001-2090 3020-00-001-4468 3020-00-007-2779 3020-00-009-4033 3020-00-031-2269 3020-00-146-4181 3020-00-146-4222 3020-00-425-7115
SUBSTITUTES & CROSS-REFERENCES 1
180965Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 180965-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180965-1?
180965-1 is a GEAR,SPUR.
What parts can replace 180965-1?
There is 1 known substitute for 180965-1: 180965. Substitute compatibility should be verified for your specific system.
What is the NSN for 180965-1?
180965-1 is cataloged in the U.S. Government catalog under NSN 3020-00-311-7616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180965-1