PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 180964 RWV C PC 45
180964 RWV C PC 45 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER AND PLASTIC OVERALL, special_features: MATERIAL FDA FOOD GRADE APPROVED;PLASTIC IS PBT, end_item_identification: MODEL A407M;ICE CREAM MAKER, accommodated_shaft_diameter: 1.000 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: REAR SEAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-474-7683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
180964 RWV C PC 45
NSN: 5330-01-474-7683
FSC: 5330
CAGE: 04742 — M D HOLDINGS LLC DBA SANISERV (USA)
SPECIFICATIONS
materialRUBBER AND PLASTIC OVERALL
special_featuresMATERIAL FDA FOOD GRADE APPROVED;PLASTIC IS PBT
end_item_identificationMODEL A407M;ICE CREAM MAKER
accommodated_shaft_diameter1.000 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyREAR SEAL
NSN5330-01-474-7683
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 180964 RWV C PC 45 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER AND PLASTIC OVERALL
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMODEL A407M;ICE CREAM MAKER
MATERIALRUBBER AND PLASTIC OVERALL
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYREAR SEAL
SPECIAL FEATURESMATERIAL FDA FOOD GRADE APPROVED;PLASTIC IS PBT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
802027107405-1Interchangeable
interchangeable cross-reference
interchangeable
21250Interchangeable
interchangeable cross-reference
interchangeable
SF-7Interchangeable
interchangeable cross-reference
interchangeable
10-854-1Interchangeable
interchangeable cross-reference
interchangeable
9011789Interchangeable
interchangeable cross-reference
interchangeable
SS-5285-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 180964 RWV C PC 45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180964 RWV C PC 45?
180964 RWV C PC 45 is a SEAL,PLAIN.
What parts can replace 180964 RWV C PC 45?
There are 10 known substitutes for 180964 RWV C PC 45: 802027107405-1, 21250, SF-7 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 180964 RWV C PC 45?
180964 RWV C PC 45 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-474-7683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180964 RWV C PC 45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026