PartsTable
Technical Data Sheet
Download PDF

1808686-1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1808686-1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, material: STEEL COMP 302 BAND, overall_width: 0.219 INCHES NOMINAL IN, style_designator: SINGLE LOOP OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.015 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-170-0347, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1808686-1
NSN: 5340-00-170-0347
FSC: 5340 — Hardware, Commercial
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
diameter0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
materialSTEEL COMP 302 BAND
overall_width0.219 INCHES NOMINAL IN
style_designatorSINGLE LOOP OFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.015 INCHES NOMINAL IN
loop_inside_diameter0.172 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.203 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.094 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.226 INCHES NOMINAL IN
NSN5340-00-170-0347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1808686-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.226 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.226 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.094 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
OVERALL WIDTH0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.203 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL COMP 302 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1808686-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1808686-1?
1808686-1 is a CLAMP,LOOP.
What is the NSN for 1808686-1?
1808686-1 is cataloged in the U.S. Government catalog under NSN 5340-00-170-0347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1808686-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.