PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1807384PC12
1807384PC12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 0.332 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, cross-sectional_thickness: 0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-684-2338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1807384PC12
NSN: 5330-00-684-2338
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter0.332 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
cross-sectional_thickness0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 5BG810 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-684-2338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1807384PC12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.332 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 5BG810 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.332 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
APERTURE DIAMETER0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 5BG810 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
FFS85TYPE2STYLE10PGRADE5Interchangeable
interchangeable cross-reference
interchangeable
120895Interchangeable
interchangeable cross-reference
interchangeable
180201Interchangeable
interchangeable cross-reference
interchangeable
A33K5FS26734Interchangeable
interchangeable cross-reference
interchangeable
R3STB106E020H89S6112RInterchangeable
interchangeable cross-reference
interchangeable
1856-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1807384PC12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1807384PC12?
1807384PC12 is a GASKET.
What parts can replace 1807384PC12?
There are 11 known substitutes for 1807384PC12: FFS85TYPE2STYLE10PGRADE5, 120895, 180201 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1807384PC12?
1807384PC12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-684-2338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1807384PC12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026