PartsTable
Technical Data Sheet
Download PDF

180613-3 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

180613-3: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include bore_diameter: 1.0625 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.2500 INCHES NOMINAL IN, outer_ring_width: 0.2810 INCHES NOMINAL IN, style_designator: SINGLE ROW INNER RING EXTENDED BOTH SIDES, lubrication_material: GREASE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-095-8977, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
180613-3
NSN: 3110-01-095-8977
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
bore_diameter1.0625 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.2500 INCHES NOMINAL IN
outer_ring_width0.2810 INCHES NOMINAL IN
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
lubrication_materialGREASE
overall_outside_diameter1.5000 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-095-8977
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 180613-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2810 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 2
•
BORE DIAMETER: 1.0625 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2810 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
BORE DIAMETER1.0625 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
INNER RING WIDTH0.2500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
B541ZZReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 180613-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180613-3?
180613-3 is a BEARING,BALL,AIRFRAME.
What parts can replace 180613-3?
There is 1 known substitute for 180613-3: B541ZZ. Substitute compatibility should be verified for your specific system.
What is the NSN for 180613-3?
180613-3 is cataloged in the U.S. Government catalog under NSN 3110-01-095-8977. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180613-3