PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1805W75
1805W75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 1.127 INCHES MINIMUM AND 1.129 INCHES MAXIMUM IN, center_hole_diameter: 0.781 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.050 INCHES NOMINAL IN, cross-sectional_shape_style: CUP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-033-6008, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1805W75
NSN: 5330-00-033-6008
FSC: 5330
CAGE: 63734 — KAITLIN CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter1.127 INCHES MINIMUM AND 1.129 INCHES MAXIMUM IN
center_hole_diameter0.781 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_thickness0.050 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
NSN5330-00-033-6008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1805W75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.050 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PERIPHERAL DIAMETER: 1.127 INCHES MINIMUM AND 1.129 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.781 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.050 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PERIPHERAL DIAMETER1.127 INCHES MINIMUM AND 1.129 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.781 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
73061Interchangeable
interchangeable cross-reference
interchangeable
841-000Z5U223PInterchangeable
interchangeable cross-reference
interchangeable
841-000-Z5U0-223PInterchangeable
interchangeable cross-reference
interchangeable
0821000Z5V0 223PInterchangeable
interchangeable cross-reference
interchangeable
15B21318Interchangeable
interchangeable cross-reference
interchangeable
H15041Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1805W75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1805W75?
1805W75 is a RETAINER,PACKING.
What parts can replace 1805W75?
There are 12 known substitutes for 1805W75: 73061, 841-000Z5U223P, 841-000-Z5U0-223P and 9 more. Substitute compatibility should be verified for your specific system.
Is 1805W75 still available?
1805W75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1805W75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026