PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1805D212
1805D212 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT A, case_style: RECESSED, seal_width: 0.640 INCHES NOMINAL IN, housing_bore_diameter: 3.550 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 2.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-018-2233, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1805D212
NSN: 5330-00-018-2233
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT A
case_styleRECESSED
seal_width0.640 INCHES NOMINAL IN
housing_bore_diameter3.550 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter2.750 INCHES NOMINAL IN
NSN5330-00-018-2233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1805D212 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT B
•
SEAL WIDTH: 0.640 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.550 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT B
SEAL WIDTH0.640 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.550 INCHES NOMINAL IN
MATERIALRUBBER SEALING ELEMENT A
SEALING ELEMENT STYLEVERTICAL-ANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
27297Interchangeable
interchangeable cross-reference
interchangeable
120 47/64Interchangeable
interchangeable cross-reference
interchangeable
46147Interchangeable
interchangeable cross-reference
interchangeable
510Interchangeable
interchangeable cross-reference
interchangeable
120 3/4Interchangeable
interchangeable cross-reference
interchangeable
2510 3/4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1805D212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1805D212?
1805D212 is a SEAL,PLAIN ENCASED.
What parts can replace 1805D212?
There are 20 known substitutes for 1805D212: 27297, 120 47/64, 46147 and 17 more. Substitute compatibility should be verified for your specific system.
Is 1805D212 still available?
1805D212 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1805D212

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026