PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 18028-1
18028-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SHIELD,BEARING,REPLACEMENT is a the manufacturer industrial component. Key specifications include connection_type: UNTHREADED INTERNAL TUBE ALL ENDS, end_item_identification: KODAK M35A X-OMAT PROCESSOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0253, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18028-1
NSN: 3110-00-277-0253
FSC: 3110
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
connection_typeUNTHREADED INTERNAL TUBE ALL ENDS
end_item_identificationKODAK M35A X-OMAT PROCESSOR
NSN3110-00-277-0253
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 18028-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 15.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OUTER RING
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
OVERALL OUTSIDE DIAMETER: 28.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE DIAMETER15.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER28.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH7.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
W0184Interchangeable
interchangeable cross-reference
interchangeable
18028-1Interchangeable
interchangeable cross-reference
interchangeable
018028Interchangeable
interchangeable cross-reference
interchangeable
175399Interchangeable
interchangeable cross-reference
interchangeable
HDB002P1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 18028-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18028-1?
18028-1 is a SHIELD,BEARING,REPLACEMENT.
What parts can replace 18028-1?
There are 5 known substitutes for 18028-1: W0184, 18028-1, 018028 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 18028-1?
18028-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0253. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18028-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026