PartsTable
Technical Data Sheet
Download PDF

180207 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

180207: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC, inscription: BREAK, overall_height: 0.8505 INCHES NOMINAL IN, overall_diameter: 0.4965 INCHES NOMINAL IN, special_features: ENAMELED GRAY WITH WHITE LEGEND; PRESS FIT MTG. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-018-0207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 180207
NSN: 5305-00-018-0207
NIINs: 000180207, 004556522, 005554042
FSC: 5305 — Screws
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialPLASTIC
inscriptionBREAK
overall_height0.8505 INCHES NOMINAL IN
overall_diameter0.4965 INCHES NOMINAL IN
special_featuresENAMELED GRAY WITH WHITE LEGEND; PRESS FIT MTG
NSN5305-00-018-0207
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 180207 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.375 INCHES MINIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.562 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM IN
FASTENER LENGTH1.500 INCHES NOMINAL IN
THREAD LENGTH1.375 INCHES MINIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.562 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.798 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
NASM90725Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35297-138Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4AX249Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFS85TYPE2STYLE10PGRADE5Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 180207?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180207?
180207 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 180207?
There are 4 known substitutes for 180207: NASM90725, MS35297-138, 4AX249 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 180207?
180207 is cataloged in the U.S. Government catalog under NSN 5305-00-018-0207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180207