PartsTable
Technical Data Sheet
Download PDF

180150 — 180150

✓ Government record, cited
Hypertec · MRO · MRO_GENERAL
PRODUCT OVERVIEW

180150: 180150.

The 180150 is a Hypertec industrial component. This part is cataloged in the U.S. Government catalog under NSN 5305-00-018-0150, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 180150
NSN: 5305-00-018-0150
NIINs: 000180150, 003313448
FSC: 5305 — Screws
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
Part Number180150
ManufacturerHypertec
NSN5305-00-018-0150
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 180150 · Hypertec ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.625 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.125 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH1.625 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH1.125 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
FF-S-85C TYPE II ST 10PReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 180150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180150?
180150 is a 180150 manufactured by Hypertec. It is classified as a MRO (MRO_GENERAL).
What parts can replace 180150?
There is 1 known substitute for 180150: FF-S-85C TYPE II ST 10P. Substitute compatibility should be verified for your specific system.
What is the NSN for 180150?
180150 is cataloged in the U.S. Government catalog under NSN 5305-00-018-0150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180150

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.