PartsTable
Technical Data Sheet
Download PDF

1800F804 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1800F804: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, height: 1.980 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075 OVERALL, closed_length: 20.000 INCHES NOMINAL IN, extended_length: 42.000 INCHES NOMINAL IN, mounting_method: SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-547-0058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1800F804
NSN: 5340-01-547-0058
NIINs: 015470058, 015470061
FSC: 5340 — Hardware, Commercial
CAGE: 95210 — PEERLESS INSTRUMENT CO., INC. (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
height1.980 INCHES NOMINAL IN
materialALUMINUM ALLOY 7075 OVERALL
closed_length20.000 INCHES NOMINAL IN
extended_length42.000 INCHES NOMINAL IN
mounting_methodSCREW
style_designator3 - MEMBER
side_for_which_designedRIGHT HAND
part_name_assigned_by_controlling_agencySLIDE 130 SERIES-LONG
NSN5340-01-547-0058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1800F804 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED LENGTH: 42.000 INCHES NOMINAL IN
•
MOUNTING METHOD: SCREW
•
STYLE DESIGNATOR: 3 - MEMBER
•
HEIGHT: 1.980 INCHES NOMINAL IN
•
CLOSED LENGTH: 20.000 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
TECHNICAL CHARACTERISTICS
EXTENDED LENGTH42.000 INCHES NOMINAL IN
MOUNTING METHODSCREW
STYLE DESIGNATOR3 - MEMBER
HEIGHT1.980 INCHES NOMINAL IN
CLOSED LENGTH20.000 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSLIDE 130 SERIES-LONG
MATERIALALUMINUM ALLOY 7075 OVERALL
SIDE FOR WHICH DESIGNEDRIGHT HAND
SUBSTITUTES & CROSS-REFERENCES 1
1303571-RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1800F804?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1800F804?
1800F804 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 1800F804?
There is 1 known substitute for 1800F804: 1303571-R. Substitute compatibility should be verified for your specific system.
What is the NSN for 1800F804?
1800F804 is cataloged in the U.S. Government catalog under NSN 5340-01-547-0058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1800F804

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.