PartsTable
Technical Data Sheet
PartsTable / IT_GENERAL / 180083
180083 ✓ Verified by PartsTable
— · IT_GENERAL · SOFTWARE
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SOFTWARE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-018-0083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IT_GENERAL→ SOFTWARE→ 180083
NSN: 5306-00-018-0083
FSC: 5306
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
special_features8MM DATA CARTRIDGE MM
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentZINC AND CHROMATE OVERALL
NSN5306-00-018-0083
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 180083 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.203 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 18
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.203 INCHES NOMINAL IN
FASTENER LENGTH1.500 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH85000 POUNDS PER SQUARE INCH LBS
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
THREAD QUANTITY PER INCH18
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
FEATURES PROVIDEDFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
197-115Interchangeable
interchangeable cross-reference
interchangeable
12Z24-24Interchangeable
interchangeable cross-reference
interchangeable
411375Interchangeable
interchangeable cross-reference
interchangeable
180083Interchangeable
interchangeable cross-reference
interchangeable
112M/DATA,CARTRIDGE/8MMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 180083?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180083?
180083 is a SOFTWARE. It is classified as a IT_GENERAL (SOFTWARE).
What parts can replace 180083?
There are 5 known substitutes for 180083: 197-115, 12Z24-24, 411375 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 180083?
180083 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-018-0083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180083

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026