PartsTable
Technical Data Sheet
Download PDF

18007B-SS-1032 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

18007B-SS-1032: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CLINCH, nut_height: 0.132 INCHES NOMINAL IN, nut_diameter: 0.344 INCHES NOMINAL IN, pilot_length: 0.038 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-058-5155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18007B-SS-1032
NSN: 5310-00-058-5155
FSC: 5310 — Nuts and Washers
CAGE: 06540 — NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCLINCH
nut_height0.132 INCHES NOMINAL IN
nut_diameter0.344 INCHES NOMINAL IN
pilot_length0.038 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
pilot_diameter0.248 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-058-5155
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 18007B-SS-1032 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.344 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.248 INCHES NOMINAL IN
•
PILOT LENGTH: 0.038 INCHES NOMINAL IN
•
NUT HEIGHT: 0.132 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.344 INCHES NOMINAL IN
PILOT DIAMETER0.248 INCHES NOMINAL IN
PILOT LENGTH0.038 INCHES NOMINAL IN
NUT HEIGHT0.132 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
10116525Reference document
Same NSN cross-reference
Reference document — Informative reference only
1032NKS-(0.040)Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 18007B-SS-1032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18007B-SS-1032?
18007B-SS-1032 is a NUT,PLAIN,CLINCH.
What parts can replace 18007B-SS-1032?
There are 2 known substitutes for 18007B-SS-1032: 10116525, 1032NKS-(0.040). Substitute compatibility should be verified for your specific system.
What is the NSN for 18007B-SS-1032?
18007B-SS-1032 is cataloged in the U.S. Government catalog under NSN 5310-00-058-5155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18007B-SS-1032