PartsTable
Technical Data Sheet
Download PDF

180-33360-7 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

180-33360-7: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56440 OVERALL, end_radius: 0.344 INCHES NOMINAL IN, fork_depth: 0.906 INCHES NOMINAL IN, shank_length: 7.031 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, overall_width: 0.906 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-527-1576, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
180-33360-7
NSN: 5340-00-527-1576
FSC: 5340 — Hardware, Commercial
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56440 OVERALL
end_radius0.344 INCHES NOMINAL IN
fork_depth0.906 INCHES NOMINAL IN
shank_length7.031 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
overall_width0.906 INCHES NOMINAL IN
thread_length1.250 INCHES NOMINAL ROD CONNECTION IN
overall_height0.688 INCHES NOMINAL IN
shank_diameter0.625 INCHES NOMINAL IN
fork_span_width0.656 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-527-1576
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 180-33360-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.625 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.656 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.125 INCHES NOMINAL IN
•
END RADIUS: 0.344 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 7.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.688 INCHES NOMINAL IN
FORK SPAN WIDTH0.656 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.070 INCHES NOMINAL IN
FORK ARM THICKNESS0.125 INCHES NOMINAL IN
END RADIUS0.344 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH7.031 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4925 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 180-33360-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 180-33360-7?
180-33360-7 is a CLEVIS,ROD END.
What is the NSN for 180-33360-7?
180-33360-7 is cataloged in the U.S. Government catalog under NSN 5340-00-527-1576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 180-33360-7