PartsTable
Technical Data Sheet
Download PDF

18-84004-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

18-84004-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 4.220 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.630 INCHES NOMINAL IN, overall_length: 5.020 INCHES NOMINAL IN, shank_diameter: 0.490 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-046-1586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18-84004-1
NSN: 5315-01-046-1586
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length4.220 INCHES NOMINAL IN
thread_class3A A
thread_length0.630 INCHES NOMINAL IN
overall_length5.020 INCHES NOMINAL IN
shank_diameter0.490 INCHES NOMINAL IN
surface_finish125.000 MICROINCHES OVERALL
first_end_styleOVAL
second_end_styleSQUARE
special_featuresSHORT SHANK IS SQUARE,0.500 IN. ACROSS FLATS,SHANK BETWEEN SHOULDER,THREADS UNDERCUT 0.545 IN. DIA,0.150 IN. LG IN
style_designatorSHOULDER
thread_directionRIGHT-HAND
NSN5315-01-046-1586
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 18-84004-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.490 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 0.490 INCHES NOMINAL IN
•
SURFACE FINISH: 125.000 MICROINCHES OVERALL
•
FIRST END LOCATION: SHANK END
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
THREAD LENGTH: 0.630 INCHES NOMINAL IN
•
FIRST END STYLE: OVAL
•
FIRST HOLE DIAMETER: 0.095 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.490 INCHES NOMINAL IN
SECOND SHANK DIAMETER0.490 INCHES NOMINAL IN
SURFACE FINISH125.000 MICROINCHES OVERALL
FIRST END LOCATIONSHANK END
HOLE ARRANGEMENT STYLEBOTH END DRILLED
THREAD LENGTH0.630 INCHES NOMINAL IN
FIRST END STYLEOVAL
FIRST HOLE DIAMETER0.095 INCHES NOMINAL IN
SHANK LENGTH4.220 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 18-84004-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18-84004-1?
18-84004-1 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 18-84004-1?
18-84004-1 is cataloged in the U.S. Government catalog under NSN 5315-01-046-1586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18-84004-1