PartsTable
Technical Data Sheet
Download PDF

18-72014-1 — STANDOFF,PLAIN,SNAP-IN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18-72014-1: STANDOFF,PLAIN,SNAP-IN.

The STANDOFF,PLAIN,SNAP-IN is a the manufacturer industrial component. Key specifications include length: 0.250 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, special_features: MAT'L IS BRASS;WIDTH OF STANDOFF IS 0.25" AND THRU-HOLE DIA. IS 0.14", style_designator: PROJECTION ONE END, end_item_identification: SSM-XMITTER G, right_projection_length: 0.105 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-472-5985, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18-72014-1
NSN: 5340-01-472-5985
FSC: 5340 — Hardware, Commercial
CAGE: 8X691 — SIERRA NEVADA COMPANY, LLC (USA)
SPECIFICATIONS
length0.250 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
special_featuresMAT'L IS BRASS;WIDTH OF STANDOFF IS 0.25" AND THRU-HOLE DIA. IS 0.14"
style_designatorPROJECTION ONE END
end_item_identificationSSM-XMITTER G
right_projection_length0.105 INCHES NOMINAL IN
right_projection_diameter0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-T-10727-TYPE 1 MIL SPEC ALL TREATMENT RESPONSES OVERALL
NSN5340-01-472-5985
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18-72014-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727-TYPE 1 MIL SPEC ALL TREATMENT RESPONSES OVERALL
•
STYLE DESIGNATOR: PROJECTION ONE END
•
MATERIAL: COPPER ALLOY OVERALL
•
RIGHT PROJECTION DIAMETER: 0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
•
RIGHT PROJECTION LENGTH: 0.105 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727-TYPE 1 MIL SPEC ALL TREATMENT RESPONSES OVERALL
STYLE DESIGNATORPROJECTION ONE END
SPECIAL FEATURESMAT'L IS BRASS;WIDTH OF STANDOFF IS 0.25" AND THRU-HOLE DIA. IS 0.14"
END ITEM IDENTIFICATIONSSM-XMITTER G
MATERIALCOPPER ALLOY OVERALL
RIGHT PROJECTION DIAMETER0.188 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
RIGHT PROJECTION LENGTH0.105 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
W61020-H-B.105-20-HTReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 18-72014-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18-72014-1?
18-72014-1 is a STANDOFF,PLAIN,SNAP-IN.
What parts can replace 18-72014-1?
There is 1 known substitute for 18-72014-1: W61020-H-B.105-20-HT. Substitute compatibility should be verified for your specific system.
What is the NSN for 18-72014-1?
18-72014-1 is cataloged in the U.S. Government catalog under NSN 5340-01-472-5985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18-72014-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.