PartsTable
Technical Data Sheet
Download PDF

18-41316-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18-41316-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, fork_depth: 0.750 INCHES NOMINAL IN, hole_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, fork_span_width: 0.255 INCHES NOMINAL IN, overall_diameter: 0.750 INCHES NOMINAL IN, fork_arm_thickness: 0.100 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-041-8235, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18-41316-1
NSN: 5340-01-041-8235
FSC: 5340 — Hardware, Commercial
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
fork_depth0.750 INCHES NOMINAL IN
hole_diameter0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
fork_span_width0.255 INCHES NOMINAL IN
overall_diameter0.750 INCHES NOMINAL IN
fork_arm_thickness0.100 INCHES NOMINAL IN
rod_connection_bore_diameter0.5017 INCHES MINIMUM AND 0.5022 INCHES MAXIMUM IN
distance_from_pivot_pinhole_center_to_rod_connection_end1.375 INCHES NOMINAL IN
NSN5340-01-041-8235
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18-41316-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.255 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.100 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
ROD CONNECTION BORE DIAMETER: 0.5017 INCHES MINIMUM AND 0.5022 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
FORK DEPTH: 0.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.255 INCHES NOMINAL IN
FORK ARM THICKNESS0.100 INCHES NOMINAL IN
OVERALL DIAMETER0.750 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER0.5017 INCHES MINIMUM AND 0.5022 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
FORK DEPTH0.750 INCHES NOMINAL IN
HOLE DIAMETER0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.375 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 18-41316-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18-41316-1?
18-41316-1 is a CLEVIS,ROD END.
What is the NSN for 18-41316-1?
18-41316-1 is cataloged in the U.S. Government catalog under NSN 5340-01-041-8235. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18-41316-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.