PartsTable
Technical Data Sheet
Download PDF

18-352-5 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

18-352-5: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.125 INCHES NOMINAL IN, overall_length: 8.406 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-495-7093, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
18-352-5
NSN: 5330-00-495-7093
FSC: 5330 — Packing and Gasket Materials
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.125 INCHES NOMINAL IN
overall_length8.406 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-495-7093
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 18-352-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
OVERALL LENGTH8.406 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH7.125 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 4
27718Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A1435Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GPW7756Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7373163Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 18-352-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18-352-5?
18-352-5 is a GASKET.
What parts can replace 18-352-5?
There are 4 known substitutes for 18-352-5: 27718, A1435, GPW7756 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 18-352-5?
18-352-5 is cataloged in the U.S. Government catalog under NSN 5330-00-495-7093. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18-352-5