PartsTable
Technical Data Sheet
18-1-2 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

Our clever design securely wall mounts the Sonos One, One SL and Play:1, with 90 degree of rotation for perfect alignment and enhanced sound. The wall mount is specifically designed to get the best performance from your Sonos S1 whilst delivering beautiful, contemporary aesthetics to grace any room in any home. Sonos Trueplay tuning technology optimises sound for the individual acoustics of the room and location in which your S1 is placed, calibrating the height channels for precise localisation which negates the need for a tilt function which can often disrupt the simple, beautiful lines of the Sonos S1.

The wall mount is easy to assemble and install wherever you wish to place - drywall, stud wall, brick, block or concrete. Designed and manufactured in the UK from laser cut steel and machined aluminium.<br><br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-398-7451, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 18-1-2
NSN: 6145-01-398-7451
FSC: 6145
CAGE: 81774 — GENERAL CABLE CORPORATION DIV CORPORATE (USA)
SPECIFICATIONS
colorBLUE
phaseTHREE
shapeROUND
materialGLASS FILTERING MEDIUM
back_gage36.000 INCHES IN
bed_width147.000 INCHES NOMINAL IN
gap_depth18.000 INCHES NOMINAL IN
body_width0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
drive_typePULLEY
front_gage50.000 INCHES IN
power_unitINCLUDED
seat_angle45.0 DEGREES NOMINAL
NSN6145-01-398-7451
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 18-1-2 · Multibrackets ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ROUND CONDUCTOR SIZE: 8 AWG ALL CONDUCTORS
CONDUCTOR ARRANGEMENT AND QUANTITY: 3 SINGLES
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B174 ASSN STD SINGLE MATERIAL RESPONSE CORE CONDUCTOR ALL CONDUCTORS
CONDUCTOR FORM: STRANDED ALL CONDUCTORS
VOLTAGE RATING: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESITEM MEETS TYPE SO 8/3. OUTER JACKETING COMPOUND IS CAROL CABLES PROPRIETARY CAROLPRENE.
ROUND CONDUCTOR SIZE8 AWG ALL CONDUCTORS
CONDUCTOR ARRANGEMENT AND QUANTITY3 SINGLES
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B174 ASSN STD SINGLE MATERIAL RESPONSE CORE CONDUCTOR ALL CONDUCTORS
MATERIALRUBBER CHLOROSULFONATED POLYETHYLENE CLASS CSM SECOND POSITION JACKET CABLE
CONDUCTOR FORMSTRANDED ALL CONDUCTORS
VOLTAGE RATING600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
COLORGREEN FIRST POSITION PRIMARY INSULATION THIRD CONDUCTOR
STRAND AWG SIZE PER CONDUCTOR29 ALL CONDUCTORS
VERIFIED SUBSTITUTES & CROSS-REFERENCES

No verified substitutes available.

LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 18-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18-1-2?
18-1-2 is a RESISTOR,FIXED,WIRE WOUND manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 18-1-2?
18-1-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-398-7451. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18-1-2