PartsTable
Technical Data Sheet
Download PDF

17DS36 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

17DS36: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, material: STEEL, ear_width: 0.250 INCHES NOMINAL IN, end_radius: 0.281 INCHES NOMINAL IN, center_radius: 0.500 INCHES NOMINAL IN, plate_thickness: 0.048 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-521-4479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17DS36
NSN: 5340-00-521-4479
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
materialSTEEL
ear_width0.250 INCHES NOMINAL IN
end_radius0.281 INCHES NOMINAL IN
center_radius0.500 INCHES NOMINAL IN
plate_thickness0.048 INCHES NOMINAL IN
special_featuresMOUNTING HOLE 0.281 IN. RADII FROM CENTER LINE IN
style_designatorFLOATING
fsc_application_dataUNIVERSAL JOINT,POWER TRANSMISSION
mounting_hole_diameter0.359 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
mounting_hole_quantity2
angle_between_ears_in_deg210.0
NSN5340-00-521-4479
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17DS36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
FSC APPLICATION DATA: UNIVERSAL JOINT,POWER TRANSMISSION
•
PLATE THICKNESS: 0.048 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.368 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
•
CENTER RADIUS: 0.500 INCHES NOMINAL IN
•
END RADIUS: 0.281 INCHES NOMINAL IN
•
ANGLE BETWEEN EARS IN DEG: 210.0
•
STYLE DESIGNATOR: FLOATING
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
FSC APPLICATION DATAUNIVERSAL JOINT,POWER TRANSMISSION
PLATE THICKNESS0.048 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.368 INCHES MINIMUM AND 2.378 INCHES MAXIMUM IN
CENTER RADIUS0.500 INCHES NOMINAL IN
END RADIUS0.281 INCHES NOMINAL IN
ANGLE BETWEEN EARS IN DEG210.0
STYLE DESIGNATORFLOATING
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1009-1020 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.359 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
8017FSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5214479Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
865849R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
5158840Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
678075Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
V2246XAReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 17DS36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17DS36?
17DS36 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 17DS36?
There are 7 known substitutes for 17DS36: 8017F, 5214479, 865849R1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17DS36?
17DS36 is cataloged in the U.S. Government catalog under NSN 5340-00-521-4479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17DS36

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.