PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17934
17934 ✓ Verified by PartsTable
Clementoni · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

2 Cleaning cloths for iPad, iPod, mobile phone, touch tablet etc.. Removes dust, dirt and stains. Soft microfiber material.

Washable and reuseable. Size 175 x 175 mm. .

Key specifications include length: 5.937 INCHES NOMINAL IN, groove_width: 0.193 INCHES NOMINAL IN, locking_ring: NOT INCLUDED, cup_protector: NOT INCLUDED, secondary_cup: NOT INCLUDED, groove_diameter: 0.747 INCHES NOMINAL IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7460, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17934
NSN: 3110-00-155-7460
FSC: 3110
CAGE: 97474 — JACKSON INDUSTRIES INC (USA)
SPECIFICATIONS
length5.937 INCHES NOMINAL IN
groove_width0.193 INCHES NOMINAL IN
locking_ringNOT INCLUDED
cup_protectorNOT INCLUDED
secondary_cupNOT INCLUDED
groove_diameter0.747 INCHES NOMINAL IN
mounting_methodINTEGRAL PUSH ROD
size_designator1
surface_featureEXTERNALLY GROOVED FOR SECONDARY CUP
largest_outside_diameter0.988 INCHES NOMINAL IN
NSN3110-00-155-7460
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 17934 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE WIDTH: 0.8480 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OVERALL OUTSIDE DIAMETER: 1.9380 INCHES NOMINAL IN
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE WIDTH0.8480 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.9063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
09196Interchangeable
interchangeable cross-reference
interchangeable
FF-B-187/01Interchangeable
interchangeable cross-reference
interchangeable
63382Interchangeable
interchangeable cross-reference
interchangeable
28402Interchangeable
interchangeable cross-reference
interchangeable
ATU15Interchangeable
interchangeable cross-reference
interchangeable
13840VInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17934?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17934?
17934 is a BEARING,ROLLER,TAPERED manufactured by Clementoni.
What parts can replace 17934?
There are 23 known substitutes for 17934: 09196, FF-B-187/01, 63382 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17934?
17934 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17934

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026